Auction #4038392 - Wood Central Boiler model CL-6048

USED Central Boiler System  LOCATED IN WEST MICHIGAN

Model CL- 6048

Classic CL 6048 

In the U.S., the Classic CL 6048 is for non-residential applications only.

Replaces up to 600 gallons of fuel oil per month*

Door - 23"W x 31"H

Firebox - 60"L x 48"H x 36"W

Heat Transfer Area - 119 sq ft

Weight - 2,140 lbs

Water Capacity - 393 gal.

Measurements and Foundation Dimensions - Illustration

Included with outdoor furnace - Water Test Kit and two 4-foot chimney sections

Recommended (not required) - Ground Rod Kit (p/n 6593)

*Actual performance values have been relayed to Central Boiler by Central Boiler Classic furnace owners.

LESS TIME TO FILL...MORE TIME FOR YOU

Constructed of titanium-enhanced stainless steel, the firebox has superior corrosion resistance and excellent heat transfer performance. This allows loading the firebox for longer burn times (in some cases up to 48 hours or more*) and burning some wood that is less than perfectly seasoned.

Central Boiler recommends burning seasoned wood when possible because dry wood burns better and provides more energy for heating your home. You'll burn less wood, saving you more money and time. That is, after all, what you want your outdoor furnace to do. *Actual burn times vary based on wood types, moisture content, heat load and ambient temperature.  

Features and Benefits

• More heat from the wood - The RippleTop design maximizes the surface area of the firebox and the HeatLock Baffle traps the heat in the heat collection area.
• Easy to load - The large, insulated steel door is ergonomically designed for easy opening and closing and insulated to lock in the heat.
• Easy to operate - The automatic draft control opens and closes as needed to control the water temperature in the system.
• Durable and long-lasting - Steel siding and powder-coating paint provide unequaled fit and finish and withstand the elements of time.
• Dual Fuel Ready option - All Classic models are available as a Dual Fuel Ready model (standard on the CL 7260 and Pallet Burner) that allows the furnace to be fitted with an optional fuel oil, natural gas, or propane burner.

1. Vent Cap - Design eliminates evaporation.
2. High-Capacity Water Jacket - Provides an added safeguard compared to designs with lower water capacity. Rigorously tested to verify weld integrity.
3. Ripple Top Design - For increased heat transfer area and lower maintenance.
4. Large, Insulated Steel Door - Ergonomically designed with a large door for easy loading. Door is insulated for maximum efficiency. Door parts are powder-coated for increased paint durability. Central Boiler's Cam Loc® door closure ensures a tight seal each time the door is closed.
5. Automatic Draft Control - Thermostatically controls the system water temperature.
6. Skid Base Framework - Makes installation easy with or without cement foundation. Only the CL 7260 and Pallet Burner require a slab.
7. Welded Steel Framework - Heavy-gauge framework engineered for enhanced strength of side panels and roof.
8. Insulated Chimney - Features a Type HT-listed, factory-built chimney that helps minimize condensation. Two 4-foot chimney sections are standard.
9. Rear Exhaust Outlet - increases efficiency and eliminates leaks and corrosion that competitors experience from chimneys that exit through the roof. Designed for easy inspection. Reduces heat loss by over 50%.
10. Water-Filled HeatLock Baffle - creates secondary combustion area and traps heat in the firebox. Will not warp or burn out with extreme heat.
11. Urethane Foam Insulation - insulation is sprayed on and forms a 100% airtight seal around the water jacket.
12. Titanium-Enhanced Stainless Steel, Rectangular Firebox - Superior corrosion resistance and excellent heat transfer performance. Engineered for exceptional structure integrity and will not collapse like round designs can.
13. Ash Pan - 3/8" thick, formed ash pan is durable and easy to clean.

*Fan Draft option available for all models.